HUAWEI HG8245H ONT. Open the Run. On the keyboard. Enter ONT login U/N & P/W (user and user). Wi-Fi Password- enters a key. It should be more.

2.5 Where can I download patches and demos? 2.9 Can I play multiplayer? Anno 1503 was first release in German at the end of 2002. There is a patch 1.05 for German “classic” versions only, released Sepetmber 2006, available from. Patch download pes 2016. Multiplayer in 1503 A.D./ANNO 1503 can be played by 2-8 players in. Need to download the patch V1.04.02 which is available on our german. Nov 3, 2005 - Download Anno 1503 - Multiplayer Setup Patch now from the world's largest gaming download. 1 - Anno 1503 A.D. V1.02.2 Hot Fix (German). To create maps please goto and download a copy of Dieter's ANNOEdit. The site is in German, but the.

1. Password Huawei Hg8245h
2. Huawei Ont Default Password

1. In primul rand sa explicam terminologia: ONT = Optical Network Terminal. Daca vrei sa accesezi setarile de baza ale terminalului Huawei HG8245H va trebui sa afli in primul rand ce IP are.
2. The default IP address of a common terminal is 192.168.100.1. Connect the PC to the LAN port on the ONT. Open the browser, enter the IP address of the ONT, and press Enter to display the ONT login page. Then, enter the user password to enter the ONT web page.

Visual studio 2010 shell invalid license data reinstall is required 2013. Advertisement Safari magazine gujarati pdf free download 2012.

Also See for Huawei HG8240

Related Manuals for Huawei HG8240

• Network Router Huawei EchoLife HG8245 Quick Start Manual
  Gpon terminal (18 pages)
• Wireless Access Point Huawei E5573S Quick Start Manual
  Mobile wifi (21 pages)
• Wireless Access Point Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual
  (122 pages)

Password Huawei Hg8245h

• Wireless Access Point Huawei PT530 User Manual
  500mbps powerline access point (61 pages)
• Wireless Access Point Huawei E5730 Quick Start Manual
  Mobile wifi (28 pages)
• Wireless Access Point Huawei B2338-168ODU Quick Start Manual
  Lte outdoor cpe (24 pages)

Summary of Contents for Huawei HG8240

Huawei Ont Default Password

• Page 1 EchoLife HG8240/HG8245/HG8247 GPON Terminal V100R002C00&C01 Service Manual Issue Date 2011-01-12 HUAWEI TECHNOLOGIES CO., LTD.
• Page 3 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

• Page 5: About This Document

  About This Document Overview GPON terminal EchoLife HG8240/HG8245/HG8247 (hereafter referred to as the HG8240/ HG8245/HG8247) is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. This document provides the appearance and specifications of the HG8240/HG8245/HG8247, and describes its configuration and usage, which helps you know the HG8240/HG8245/HG8247 quickly.
• Page 6 Chapters Description 2 System Overview This topic provides the appearance and describes the typical network applications of the HG8240/HG8245/HG8247. 3 Configuration This topic describes how to configure services through the NMS, the OLT CLI, the Web page or the U2560.

• Page 7: General Conventions

  For example, click OK. > Multi-level menus are separated by the > sign. For example, choose File > Create > Folder. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 8: Mouse Conventions

  Updates in Issue 04 (2011-01-12) For the HG8240/HG8245/HG8247 V100R002C00&C01, this is the fourth release. The updates are as follows: The manual structure is modified and operation guides on the OLT NMS and the command line are added.
• Page 9 Configuration of the NMS and the TR-069 server is added. The power consumption data of the ONT is updated. Updates in Issue 01 (2010-05-31) This is the first release for the HG8240/HG8245/HG8247 V100R002. It is the first archive. Issue 04 (2011-01-12) Huawei Proprietary and Confidential..

• Page 11: Table Of Contents

  3.4.1.1 Enabling Layer 2 Service Channels Between an OLT and a GPON ONT (on the OLT CLI).3-171 3.4.2 Data Plan..............3-181 3.4.3 Locally Logging in to the Web Interface..........3-183 3.4.4 Configuring the Internet Access Service on the Web Page.......3-185 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 12 4.6.1 Querying and Deleting Performance Statistics of an ETH Port......4-27 5 Web Page Reference............5-1 5.1 Status................5-3 5.1.1 WAN Information.............5-3 5.1.2 VoIP Information..............5-3 5.1.3 Wi-Fi Information.............5-4 5.1.4 Eth Port Information.............5-5 5.1.5 DHCP Server Information............5-5 5.1.6 Optic Information..............5-5 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 13 5.10.2 Restore Default Configuration...........5-40 5.10.3 Ping Test...............5-40 5.10.4 Log...............5-41 5.10.5 Configuration File.............5-41 5.10.6 Firmware Upgrade.............5-42 5.10.7 ONT Authentication..............5-42 5.10.8 Time Setting..............5-43 5.10.9 TR-069................5-44 5.10.10 Modify Login Password............5-45 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 14 EchoLife HG8240/HG8245/HG8247 GPON Terminal Contents Service Manual 5.10.11 Advanced Power Management...........5-46 6 Technical Specifications...........6-1 6.1 Physical Specifications..............6-2 6.2 Protocols and Standards.............6-2 7 Acronyms and Abbreviations..........7-1 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 15 Figure 2-2 Appearance of the HG8245............2-3 Figure 2-3 Appearance of the HG8247............2-4 Figure 2-4 Ports on the rear panel of the HG8240..........2-4 Figure 2-5 Ports on the side panel of the HG8240..........2-5 Figure 2-6 Ports on the rear panel of the HG8245..........2-6 Figure 2-7 Ports on the side panel of the HG8245..........2-7..
• Page 16 Figure 5-23 DMZ Configuration............5-26 Figure 5-24 PortMapping Configuration...........5-27 Figure 5-25 PortTrigger Configuration...........5-28 Figure 5-26 USB...............5-29 Figure 5-27 ALG Configuration.............5-30 Figure 5-28 UPnP Configuration............5-31 Figure 5-29 ARP Configuration.............5-31 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 17 Figure 5-38 Configuration File..............5-41 Figure 5-39 Firmware Upgrade.............5-42 Figure 5-40 ONT Authentication............5-42 Figure 5-41 Time Setting..............5-43 Figure 5-42 TR-069..............5-44 Figure 5-43 Modify Login Password.............5-45 Figure 5-44 Advanced Power Management............5-46 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 19 Tables Tables Table 2-1 Descriptions of the ports on the rear panel of the HG8240.......2-5 Table 2-2 Descriptions of the ports on the side panel of the HG8240.......2-5 Table 2-3 Descriptions of the ports on the rear panel of the HG8245.......2-6 Table 2-4 Descriptions of the ports on the side panel of the HG8245.......2-7..
• Page 20 Table 5-17 Parameters used for configuring a VoIP user based on the H.248 protocol....5-39 Table 5-18 Parameters related to the system time..........5-43 Table 5-19 TR-069 parameters..............5-45 Table 6-1 Physical specifications.............6-2 xviii Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 21: Safety Precautions

  Instructions for Use Use the accessories delivered with the device, or use those recommended by the vendor, such as the power adapter and battery. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 22 Instructions for Environment Protection Put the retired device and batteries at the specified recycle place. Abide by local laws and regulations to handle packaging materials, run-out batteries and retired devices. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 23: System Overview

  This topic provides the appearance and describes the typical network applications of the HG8240/HG8245/HG8247. 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. 2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247.

• Page 24: Product Introduction

  2 System Overview Service Manual 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. The HG8240/HG8245/HG8247 is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. Its upper shell adopts the natural heat dissipation material, and its optical port adopts the dust-proof design with a rubber plug.

• Page 25: Figure 2-1 Appearance Of The Hg8240

  EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 2 System Overview Figure 2-1 Appearance of the HG8240 Figure 2-2 Appearance of the HG8245 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 26: Ports

  EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Figure 2-3 Appearance of the HG8247 2.1.2 Ports This topic provides the appearance of the ports on the HG8240/HG8245/HG8247 and describes the functions of the ports. Ports on the HG8240 Figure 2-4 Figure 2-5 show the ports on the rear panel and side panel of the HG8240 respectively.

• Page 27: Figure 2-5 Ports On The Side Panel Of The Hg8240

  EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 2 System Overview Table 2-1 Descriptions of the ports on the rear panel of the HG8240 Port and Button Function Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream transmission.

• Page 28: Figure 2-6 Ports On The Rear Panel Of The Hg8245

  Indicates the power-on/power-off button, used for powering on ON/OFF or powering off the device. Indicates the power port, used for connecting to the power POWER adapter or backup battery. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 29: Figure 2-7 Ports On The Side Panel Of The Hg8245

  10s) to restore the device to the default settings and reset the device. Ports on the HG8247 Figure 2-8 Figure 2-9 show the ports on the rear panel and side panel of the HG8247 respectively. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 30: Figure 2-8 Ports On The Rear Panel Of The Hg8247

  Indicates the power-on/power-off button, used for powering on ON/OFF or powering off the device. Indicates the power port, used for connecting to the power POWER adapter or backup battery. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 31: Leds

  (longer than RESET 10s) to restore the device to the default settings and reset the device. 2.1.3 LEDs This topic provides the appearance of the LEDs on the HG8240/HG8245/HG8247 and describes the indications of these LEDs. Figure 2-10, Figure 2-11..

• Page 32: Figure 2-10 Leds On The Hg8240

  EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Figure 2-10 LEDs on the HG8240 2-10 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 33: Figure 2-11 Leds On The Hg8245

  EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 2 System Overview Figure 2-11 LEDs on the HG8245 Figure 2-12 LEDs on the HG8247 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 2-11 Copyright © Huawei Technologies Co., Ltd.

• Page 34: Table 2-7 Indications Of The Leds On The Hg8240/hg8245/hg8247

  EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Table 2-7 Indications of the LEDs on the HG8240/HG8245/HG8247 Silk Screen Name Status Indication Green: always on The device is powered on. Power supply Orange: always The device is powered by the POWER backup battery.

• Page 35: Typical Network Applications

  2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247. As a network terminal, the HG8240/HG8245/HG8247 is deployed at the GPON access layer and connects home users and SOHO users to the Internet through optical upstream ports. On the local area network (LAN) side, the HG8240/HG8245/HG8247 provides abundant hardware ports to meet various network requirements of home users and SOHO users.

• Page 36: Figure 2-13 Network Topology Of The Hg8240

  Service Manual Figure 2-13 Network topology of the HG8240 In the upstream direction, the HG8240 is connected to the optical splitter and the network- side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.

• Page 37: Figure 2-15 Network Topology Of The Hg8247

  PCs, STBs, and video phones to provide the high-speed data and video services. – Two TEL ports, which can be connected to telephone sets or fax machines to provide superior and cost-effective VoIP, FoIP, and MoIP services. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 2-15 Copyright © Huawei Technologies Co., Ltd.
• Page 38 – One USB port, which can be connected to a USB storage device to provide convenient storage and file sharing services within a home network. 2-16 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 39: Configuration

  U2560. Context NOTE l The procedures for configuring HG8240/HG8245/HG8247 are similar. The following sections consider HG8245 as an example. l The U2000 V100R002C01 is used in the following configuration examples. The screen snapshots vary with different U2000 versions but the configuration procedures are similar. For details, see the associated configuration manual.

• Page 40: Before Your Start

  OLT commands or the U2000 is required. This method is not recommended because it is complex. Table 3-2 lists configuration methods supported in the FTTH service. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 41: Table 3-2 Configuration Methods Supported In The Ftth Service

  NOTE Currently, the HG8240/HG8245/HG8247 supports only the U2560 as the TR-069 server. Therefore, the TR-069 configuration in this chapter is the U2560 configuration. The following section provides key technologies involved in these methods: ONT management and control interface (OMCI) is a protocol defined in ITU-T G.984.4.

• Page 42: Configuring The Service By Using The Nms

  Configuration rolls back or even factory defaults are restored if an incorrect XML configuration file is imported. When configuration parameters of an XML configuration file need to be modified, please contact Huawei technical engineers for help. 3.2 Configuring the Service by Using the NMS This topic describes how to configure Internet access service, VoIP service and IPTV service by using the NMS.

• Page 43: Data Plan

  Name: FTTx The MEF IP traffic profile profile is used on the l CIR: 20480 ONT to control l Outer Priority: 1 upstream and downstream traffic. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 44 Interface Selection: 0/2/1/0/0 l Service Type: Multi- Service VLAN l User VLAN: 10 l Keep the upstream and downstream settings the same: selected l Upstream Traffic Name: FTTx Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 45 Keep the upstream and downstream settings the same: selected l Upstream Traffic Name: FTTx Multicast VLAN l IGMP Version: IGMP V3 l Work Mode: igmp_proxy l VLAN ID: 1000 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 46 Interface Selection: 0/2/1/0/0 l Service Type: Multi- Service VLAN l User VLAN: 20 l Keep the upstream and downstream settings the same: selected l Upstream Traffic Name: FTTx Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 47 Signaling Protocol: H248 l Primary MGC: 200.200.200.200 l MID Format: Domain name l MGC Port: 2944 l MGC Domain name: 6877687714852901 l TID: A0 and A1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 48: Configuring Gpon Ftth Layer 2 Internet Access Service On The Nms

  This topic describes how to configure the high-speed Internet service when an ONT is connected to an OLT through a GPON port. Context For details of the data plan, see Data Plan. 3-10 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 49: Figure 3-1 Configuring The Gpon Ftth Internet Service

  (1) Choose Configuration > Access Profile Management > Traffic Profile from the main menu. (2) Click the MEF IP Traffic Profile tab. (3) Right-click and choose Add Global Profile from the shortcut menu. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-11 Copyright © Huawei Technologies Co., Ltd.
• Page 50 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 3-12 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 51 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-13 Copyright © Huawei Technologies Co., Ltd.
• Page 52 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 3-14 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 53 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-15 Copyright © Huawei Technologies Co., Ltd.
• Page 54 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 55 Port Type is set to ETH and Port ID is set to 3, and choose UNI Port Configuration Properties from the shortcut menu. In the dialog box that is displayed, set the parameters. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-17 Copyright © Huawei Technologies Co., Ltd.
• Page 56 Service Profile and select the service profile named FTTx in the dialog box that is displayed) – Authentication Mode: SN – Terminal Type: 245 3-18 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 57 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 100 – Type: Smart VLAN Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-19 Copyright © Huawei Technologies Co., Ltd.
• Page 58 0/2/1/0 (when the connection type is LAN-EPON) – Service Type: Multi-Service VLAN – User VLAN: 10 – Keep the upstream and downstream settings the same: selected 3-20 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 59: Configuring Gpon Ftth Layer 3 Internet Access Service On The Nms

  The ONT is connected to the GPBC card of the OLT through an optical fiber. The broadband remote access server (BRAS) provides the authentication, authorization, and accounting (AAA) functions. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-21 Copyright © Huawei Technologies Co., Ltd.

• Page 60: Figure 3-2 Configuring The Gpon Ftth Internet Service

  (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – CIR: 20480 – Outer Priority: 1 3-22 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 61 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-23 Copyright © Huawei Technologies Co., Ltd.
• Page 62 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue 3-24 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 63 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-25 Copyright © Huawei Technologies Co., Ltd.
• Page 64 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) 3-26 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 65 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 66 – On the Basic Parameters tab page, set the parameters. – Line Profile: FTTx (click next to Line Profile and select the line profile named FTTx in the dialog box that is displayed) 3-28 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 67 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 100 – Type: Smart VLAN Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-29 Copyright © Huawei Technologies Co., Ltd.
• Page 68 0/2/1/0 (when the connection type is LAN-EPON) – Service Type: Multi-Service VLAN – User VLAN: 10 – Keep the upstream and downstream settings the same: selected 3-30 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 69 (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-HSI – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-31 Copyright © Huawei Technologies Co., Ltd.
• Page 70 If LAN port two three-port enable is enable, the LAN port works in the Layer 3 mode. LAN port two three-port enable is defaulted to disable. (5) Configure parameters of a WAN port. 3-32 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 71 VLAN ID configured on the OLT.) – Priority: 1 Select LAN&WANBindNode below WAN PPP Interface 1 and set LAN1 Enabled to enable for binding LAN 1 to the WAN port. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-33 Copyright © Huawei Technologies Co., Ltd.
• Page 72 Interface 1. Select WAN PPP Interface 1, and set User Name to iadtest@pppoe and Password to iadtest. The user name and password must be the same as those configured on the BRAS. 3-34 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 73: Configuring Gpon Ftth Voice Service (h.248) On The Nms

  Example Network The phones connected to different ONTs can communicate with each other. The ONT obtains an IP address in Dynamic Host Configuration Protocol (DHCP) mode. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-35 Copyright © Huawei Technologies Co., Ltd.

• Page 74: Figure 3-3 Configuring The Gpon Ftth Voice Service (h.248 Protocol)

  (2) Click the MEF IP Traffic Profile tab. (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx 3-36 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 75 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-37 Copyright © Huawei Technologies Co., Ltd.
• Page 76 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue 3-38 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 77 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-39 Copyright © Huawei Technologies Co., Ltd.
• Page 78 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) 3-40 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 79 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 80 – On the Basic Parameters tab page, set the parameters. – Line Profile: FTTx (click next to Line Profile and select the line profile named FTTx in the dialog box that is displayed) 3-42 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 81 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 200 – Type: Smart VLAN Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-43 Copyright © Huawei Technologies Co., Ltd.
• Page 82 – Interface Selection: 0/2/1/0/0 (when the connection type is LAN-GPON) or 0/2/1/0 (when the connection type is LAN-EPON) – Vlan ID: 200 (SVLAN ID) – Service Type: Multi-Service VLAN – User VLAN: 20 (CVLAN ID) 3-44 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 83 (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-VoIP – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-45 Copyright © Huawei Technologies Co., Ltd.
• Page 84 – Priority: 6 – Addressing Type: DHCP – Service List: VOIP (For configuring the VoIP service, VoIP or a combination containing VoIP needs to be selected.) 3-46 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 85 Interface configuration > Interface 1. Select Interface 1 and select a proper value. – Signaling Protocol: H248 – Region: China – Associate WAN Interface: wan1 (binding the created voice WAN port) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-47 Copyright © Huawei Technologies Co., Ltd.
• Page 86 – MID Format: Domain name NOTE l If dual-homing is configured, Secondary MGC must be set. l MID Format can be set to Domain Name, IP, or Device name. 3-48 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 87 Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
• Page 88 Interface configuration > Interface 1 > User. Click User 1 > H248 and set TID to A0. Click User 2 > H248 and set TID to A1. 3-50 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 89: Configuring Gpon Ftth Voice Service (sip) On The Nms

  GPON port. Example Network The phones connected to different ONTs can communicate with each other. The ONT obtains an IP address in DHCP mode. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-51 Copyright © Huawei Technologies Co., Ltd.

• Page 90: Figure 3-4 Configuring The Gpon Ftth Voice Service (sip Protocol)

  (2) Click the MEF IP Traffic Profile tab. (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx 3-52 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 91 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-53 Copyright © Huawei Technologies Co., Ltd.
• Page 92 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue 3-54 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 93 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-55 Copyright © Huawei Technologies Co., Ltd.
• Page 94 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) 3-56 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 95 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 96 – On the Basic Parameters tab page, set the parameters. – Line Profile: FTTx (click next to Line Profile and select the line profile named FTTx in the dialog box that is displayed) 3-58 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 97 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 200 – Type: Smart VLAN Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-59 Copyright © Huawei Technologies Co., Ltd.
• Page 98 – Interface Selection: 0/2/1/0/0 (when the connection type is LAN-GPON) or 0/2/1/0 (when the connection type is LAN-EPON) – Vlan ID: 200 (SVLAN ID) – Service Type: Multi-Service VLAN – User VLAN: 20 (CVLAN ID) 3-60 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 99 (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-VoIP – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-61 Copyright © Huawei Technologies Co., Ltd.
• Page 100 – Priority: 6 – Addressing Type: DHCP – Service List: VOIP (For configuring the VoIP service, VoIP or a combination containing VoIP needs to be selected.) 3-62 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 101 Interface configuration > Interface 1. Select Interface 1 and select a proper value. – Signaling Protocol: SIP – Region: China – Associate WAN Interface: wan1 (binding the created voice WAN port) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-63 Copyright © Huawei Technologies Co., Ltd.
• Page 102 – Proxy Server: 200.200.200.200 – Home Domain: softx3000.huawei.com NOTE If dual-homing is configured, Secondary Proxy Server must be set. (7) Configure the voice users. 3-64 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 103 Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
• Page 104 – Auth Password: iadtest1 Set parameters of User 2 using the same method. – Directory Number: 88001235 – Auth User Name: 88001235@softx3000.huawei.com – Auth Password: iadtest2 3-66 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 105: Configuring Gpon Ftth Layer 2 Multicast Service On The Nms

  The OLT uses IGMP proxy, which is a Layer 2 multicast protocol. The IGMP version of the multicast VLAN is IGMPv3. Multicast programs are configured statically. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-67 Copyright © Huawei Technologies Co., Ltd.

• Page 106: Figure 3-5 Configuring The Gpon Ftth Multicast Service

  (2) Click the MEF IP Traffic Profile tab. (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx 3-68 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 107 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-69 Copyright © Huawei Technologies Co., Ltd.
• Page 108 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue 3-70 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 109 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-71 Copyright © Huawei Technologies Co., Ltd.
• Page 110 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) 3-72 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 111 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 112 Port Type is set to ETH and Port ID is set to 3, and choose UNI Port Configuration Properties from the shortcut menu. In the dialog box that is displayed, set the parameters. 3-74 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 113 Service Profile and select the service profile named FTTx in the dialog box that is displayed) – Authentication Mode: SN – Terminal Type: 245 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-75 Copyright © Huawei Technologies Co., Ltd.
• Page 114 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 1000 – Type: Smart VLAN 3-76 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 115 – Vlan ID: 1000 (SVLAN ID) – Service Type: Multi-Service VLAN – User VLAN: 30 (CVLAN ID) – Keep the upstream and downstream settings the same: selected Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-77 Copyright © Huawei Technologies Co., Ltd.
• Page 116 (3) In the information list, right-click and choose Add from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – IGMP Version: IGMP V3 – Work Mode: igmp_proxy – VLAN ID: 1000 3-78 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 117 (3) In the information list, right-click and choose Add from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – VLAN ID: 1000 – Frame: 0 – Slot: 19 – Port: 0 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-79 Copyright © Huawei Technologies Co., Ltd.
• Page 118 – Preview Profile: 0 (the default value) (5) Click OK. (6) In the information list, right-click the record and choose Download to NE from the shortcut menu. 3-80 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 119 Add from the shortcut menu. (6) In the dialog box that is displayed, select the record where Multicast VLAN ID is set to 1000 and click OK. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-81 Copyright © Huawei Technologies Co., Ltd.

• Page 120: Configuring Gpon Ftth Layer 3 Bridge Multicast Service On The Nms

  The OLT uses IGMP proxy, which is a Layer 2 multicast protocol. The IGMP version of the multicast VLAN is IGMPv3. Multicast programs are configured statically. 3-82 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 121: Figure 3-6 Configuring The Gpon Ftth Multicast Service

  (2) Click the MEF IP Traffic Profile tab. (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-83 Copyright © Huawei Technologies Co., Ltd.
• Page 122 (3) Right-click and choose Add Global Profile from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – Name: FTTx – T-CONT type: Maximum Bandwidth – Maximum Bandwidth: 32768 3-84 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 123 – Set Name to FTTx. – Choose Base Info. from the navigation tree and set the parameters. – Mapping Mode: VLAN – Qos Mode: Priority Queue Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-85 Copyright © Huawei Technologies Co., Ltd.
• Page 124 – Right-click T-CONT1 in the navigation tree and choose Add GEM Port from the shortcut menu. In the dialog box that is displayed, set the parameters. – GEM Port Index: 1 – Priority Queue: 1 3-86 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 125 Connection from the shortcut menu. In the dialog box that is displayed, set the parameter. – GEM Connection Index: 1 (this parameter is set to 1 automatically) – VLAN ID: 20 (Voice user-side VLAN ID) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-87 Copyright © Huawei Technologies Co., Ltd.
• Page 126 (7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 127 – On the Basic Parameters tab page, set the parameters. – Line Profile: FTTx (click next to Line Profile and select the line profile named FTTx in the dialog box that is displayed) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-89 Copyright © Huawei Technologies Co., Ltd.
• Page 128 (2) On the VLAN tab page, right-click and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set the parameters. – VLAN ID: 1000 – Type: Smart VLAN 3-90 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 129 – Vlan ID: 1000 (SVLAN ID) – Service Type: Multi-Service VLAN – User VLAN: 30 (CVLAN ID) – Keep the upstream and downstream settings the same: selected Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-91 Copyright © Huawei Technologies Co., Ltd.
• Page 130 (3) In the information list, right-click and choose Add from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – IGMP Version: IGMP V3 – Work Mode: igmp_proxy – VLAN ID: 1000 3-92 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 131 (3) In the information list, right-click and choose Add from the shortcut menu. (4) In the dialog box that is displayed, set the parameters. – VLAN ID: 1000 – Frame: 0 – Slot: 19 – Port: 0 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-93 Copyright © Huawei Technologies Co., Ltd.
• Page 132 – Preview Profile: 0 (the default value) (5) Click OK. (6) In the information list, right-click the record and choose Download to NE from the shortcut menu. 3-94 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 133 Add from the shortcut menu. (6) In the dialog box that is displayed, select the record where Multicast VLAN ID is set to 1000 and click OK. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-95 Copyright © Huawei Technologies Co., Ltd.
• Page 134 Interface > LAN Ethernet Configuration 3. Select LAN Ethernet Configuration 3 and set LAN Port twothree-port enable to enable (Indicating that LAN 3 works in the Layer 3 mode). 3-96 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 135 – Priority: 4 – MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must be the same as the multicast VLAN ID configured on the OLT.) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-97 Copyright © Huawei Technologies Co., Ltd.
• Page 136 (4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding. ----End 3-98 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 137: Configuration By Using Olt Commands

  The subsequent examples are configured based on the following data plan. Data Plan Table 3-4 provides the unified data plan for configuring the HSI, IPTV, and VoIP services in an FTTH network. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-99 Copyright © Huawei Technologies Co., Ltd.

• Page 138: Table 3-4 Data Plan For The Ftth Gpon Access

  TCONTs. Mbit/s Different l T-CONT ID: 3 TCONTs are planned for different bandwidth assurance types. l Generally, the service with a high priority adopts a fixed 3-100 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 139 OLT: IGMP proxy service data l ONT: IGMP snooping Multicast version IGMP V3 IGMP v3 and IGMP v2 are supported, and IGMP v3 is compatible with IGMP v2. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-101 Copyright © Huawei Technologies Co., Ltd.
• Page 140 IP address of the primary When dual homing softswitch to which the SIP is configured, the IP interface belongs: address and the port 200.200.200.200/24 ID of the secondary 3-102 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 141: Configuring The Gpon Ftth Layer 2 Internet Access Service On The Olt Cli

  The high-speed Internet access service adopts a bandwidth-ensured mode with the maximum bandwidth 100 Mbit/s as the DBA profile and performs the 4 Mbit/s rate limitation on both the upstream and downstream directions. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-103 Copyright © Huawei Technologies Co., Ltd.

• Page 142: Table 3-5 Data Plan

  DBA profile, the QoS mode of the traffic stream, and the mapping between the GEM port and the ONT-side service. – Service profile: A service profile provides the service configuration channel for the ONT that is managed through OMCI. 3-104 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 143 The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The ID of the VLAN to which ETH port 1 belongs is 10.
• Page 144 If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
• Page 145 ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
• Page 146 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;..

• Page 147: Configuring The Gpon Ftth Layer 3 Internet Access Service On The Olt Cli

  Users' PCs are connected to the ONT using the LAN port. IP addresses of users' PCs are allocated by the DHCP IP address pool on the ONT. After PPPoE auto dialup is performed Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-109 Copyright © Huawei Technologies Co., Ltd.
• Page 148 In this example, a single upstream port is used. In the case of multiple upstream ports, upstream link aggregation can be configured. For details, see Configuring Upstream Link Aggregation. Configure GPON ONT profiles. 3-110 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 149 (3) Configure an ONT service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 150 If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
• Page 151 ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
• Page 152 Set the service port indexes to 1 and 2, SVLAN ID to 100, GEM port ID to 1, and CVLAN ID to 10. Use traffic profile 8. huawei(config)#service-port 1 vlan 100 gpon 0/1/1 ont 1 gemport 1 multi- service user-vlan 10 rx-cttr 8 tx-cttr 8..
• Page 153 EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2;..
• Page 154 (2) On the ONT VAS Profile tab page, right-click, and choose Add from the shortcut menu. (3) In the dialog box that is displayed, set relevant parameters. 3-116 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 155 If LAN port two three-port enable is enable, the LAN port works in the Layer 3 mode. LAN port two three-port enable is defaulted to disable. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-117 Copyright © Huawei Technologies Co., Ltd.
• Page 156 – VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user- side VLAN ID configured on the OLT.) – Priority: 1 3-118 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 157 (4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-119 Copyright © Huawei Technologies Co., Ltd.
• Page 158 1 eth tcont 4 mapping-mode vlan gem mapping 1 0 vlan 10 commit quit ont-srvprofile gpon profile-id 10 ont-port eth 4 pots 2 commit 3-120 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 159: Configuring The Gpon Ftth Voip Service (h.248-based) On The Olt Cli

  Port ID of the MGC server: 2944 MG registration mode: domain name MG domain name: 6877687714852901 Terminal IDs of line 1 and line 2: A0 and A1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-121 Copyright © Huawei Technologies Co., Ltd.
• Page 160 DBA profile. Set the DBA profile ID to 20, type to Type3, assured bandwidth to 15 Mbit/s, and maximum bandwidth to 30 Mbit/s. 3-122 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 161 (3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 162 If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
• Page 163 EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1 huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1 Confirm that the ONT goes online normally. After an ONT is added, run the display ont info command to query the current status of the ONT.
• Page 164 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;..
• Page 165 – Set MGC Address below Primary Server to 200.200.200.200. – MID Format: DomainName – MG Domain: 6877687714852901 – Signaling Port: 1_VOIP_R_VID_20 – Region: CN – China Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-127 Copyright © Huawei Technologies Co., Ltd.
• Page 166 MGC type. Profile Index is set to Default (indicating interconnection with Huawei MGC) in this example. If the settings do not meet requirements, configure UserDefine. For details about how to configure this parameter, contact Huawei technical support.
• Page 167 Status is Connected and the obtained IP address is displayed at IP. Check the registration status of the voice user. In the navigation tree, choose Status > VoIP Information. In the right pane, User Status is Up. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-129 Copyright © Huawei Technologies Co., Ltd.
• Page 168 (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-VoIP – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01 3-130 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 169 Interface configuration > Interface 1. Select Interface 1 and select a proper value. – Signaling Protocol: H248 – Region: China – Associate WAN Interface: wan1 (binding the created voice WAN port) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-131 Copyright © Huawei Technologies Co., Ltd.
• Page 170 – MID Format: Domain name NOTE l If dual-homing is configured, Secondary MGC must be set. l MID Format can be set to Domain Name, IP, or Device name. 3-132 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 171 Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
• Page 172 In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1 > User. Click User 1 > H248 and set TID to A0. 3-134 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 173 ----End Result Connect two phone sets to two TEL ports of different ONTs, and calls can be made between two phone sets. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-135 Copyright © Huawei Technologies Co., Ltd.

• Page 174: Configuring The Gpon Ftth Voip Service (sip-based) On The Olt Cli

  Users of phone sets under different ONTs can call and communicate with each other. The DBA mode of the VoIP service is assured bandwidth + maximum bandwidth, and no rate limitation is performed on the upstream and downstream traffic. 3-136 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 175: Table 3-10 Data Plan

  Therefore, the ARP proxy function of the OLT needs to be enabled. huawei(config)#arp proxy enable huawei(config)#interface vlanif 200 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-137 Copyright © Huawei Technologies Co., Ltd.
• Page 176 DBA profile. Set the DBA profile ID to 20, type to Type3, assured bandwidth to 15 Mbit/s, and maximum bandwidth to 30 Mbit/s. huawei(config)#dba-profile add profile-id 20 type3 assure 15360 max 30720 (2) Configure an ONT line profile.
• Page 177 3 Configuration (3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
• Page 178 ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
• Page 179 Set the service port indexes to 3 and 4, SVLAN ID to 200, GEM port ID to 2, and CVLAN ID to 20. Use traffic profile 9. huawei(config-if-gpon-0/1)#quit huawei(config)#service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi- service user-vlan 20 rx-cttr 9 tx-cttr 9 huawei(config)#service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi- service user-vlan 20 rx-cttr 9 tx-cttr 9 Configure the queue scheduling mode.
• Page 180 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;..
• Page 181 Port. (3) Click Apply to apply the configuration. Configure parameters of the SIP-based voice users. (1) In the navigation tree, choose Voice > VoIP User Configuration. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-143 Copyright © Huawei Technologies Co., Ltd.
• Page 182 Save Configuration to save the configuration. Restart the voice process. In the navigation tree, choose Status > VoIP Information. In the right pane, click Restart VoIP. 3-144 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 183 (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-VoIP – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-145 Copyright © Huawei Technologies Co., Ltd.
• Page 184 – Priority: 6 – Addressing Type: DHCP – Service List: VOIP (For configuring the VoIP service, VoIP or a combination containing VoIP needs to be selected.) 3-146 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 185 Interface configuration > Interface 1. Select Interface 1 and select a proper value. – Signaling Protocol: SIP – Region: China – Associate WAN Interface: wan1 (binding the created voice WAN port) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-147 Copyright © Huawei Technologies Co., Ltd.
• Page 186 – Proxy Server: 200.200.200.200 – Home Domain: softx3000.huawei.com NOTE If dual-homing is configured, Secondary Proxy Server must be set. (7) Configure the voice users. 3-148 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 187 Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
• Page 188 – Auth Password: iadtest1 Set parameters of User 2 using the same method. – Directory Number: 88001235 – Auth User Name: 88001235@softx3000.huawei.com – Auth Password: iadtest2 3-150 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 189: Configuring The Gpon Ftth Layer 2 Multicast Service On The Olt Cli

  The OLT adopts IGMP proxy, a Layer 2 multicast protocol. Multicast programs are configured statically and multicast users are authenticated. The IGMP version of the multicast VLAN is IGMP V3. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-151 Copyright © Huawei Technologies Co., Ltd.

• Page 190: Table 3-11 Data Plan

  For details, see Configuring Upstream Link Aggregation. Configure GPON ONT profiles. GPON ONT profiles include the DBA profile, line profile, service profile, and alarm profile. 3-152 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 191 (3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. Set the VLAN ID of ETH port 3 to 30.
• Page 192 If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
• Page 193 ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
• Page 194 Set the service port indexes to 5 and 6, SVLAN ID to 1000, GEM port ID to 3, and CVLAN ID to 30. Use traffic profile 10. huawei(config)#service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi- service user-vlan 30 rx-cttr 10 tx-cttr 10..
• Page 195 EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2;..
• Page 196 5 profile-name profile0 igmp user bind-profile service-port 6 profile-name profile0 multicast-vlan 1000 igmp multicast-vlan member service-port 5 igmp multicast-vlan member service-port 6 quit save 3-158 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 197: Configuring The Gpon Ftth Layer 3 Bridge Multicast Service On The Olt Cli

  The OLT is connected to the BRAS and the multicast source. The VLAN of the LAN switch port connected to the OLT is the same as the upstream VLAN of the OLT. Procedure Configure the OLT. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-159 Copyright © Huawei Technologies Co., Ltd.
• Page 198 DBA profile. Set the DBA profile ID to 30, type to type4, and maximum bandwidth to 60 Mbit/ huawei(config)#dba-profile add profile-id 30 type4 max 61440 (2) Configure an ONT line profile. Create GPON ONT line profile 10 and bind T-CONT 3 to DBA profile 30.
• Page 199 (3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The multicast packets forwarded by the ONT do not carry VLAN tags.
• Page 200 ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
• Page 201 Set the service port indexes to 5 and 6, SVLAN ID to 1000, GEM port ID to 3, and CVLAN ID to 30. Use traffic profile 10. huawei(config)#service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi- service user-vlan 30 rx-cttr 10 tx-cttr 10..
• Page 202 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;..
• Page 203 Configure users of service ports 5 and 6 as multicast users and bind right profile profile0 to the service ports. huawei(config-btv)#igmp policy service-port 5 normal huawei(config-btv)#igmp policy service-port 6 normal huawei(config-btv)#igmp user add service-port 5 auth huawei(config-btv)#igmp user add service-port 6 auth huawei(config-btv)#igmp user bind-profile service-port 5 profile-name profile0..
• Page 204 ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT, right-click, and choose Configure Value-Added Service from the shortcut menu. 3-166 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 205 If LAN Port two three-port enable is enable, the LAN port works in the Layer 3 mode. LAN Port two three-port enable is defaulted to disable. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-167 Copyright © Huawei Technologies Co., Ltd.
• Page 206 – Priority: 4 – MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must be the same as the multicast VLAN ID configured on the OLT.) 3-168 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 207 (4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding. ----End Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-169 Copyright © Huawei Technologies Co., Ltd.
• Page 208 5 profile-name profile0 igmp user bind-profile service-port 6 profile-name profile0 multicast-vlan 1000 igmp multicast-vlan member service-port 5 igmp multicast-vlan member service-port 6 quit save 3-170 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 209: Configuration On The Web Page

  To configure GPON ONT-side services, enable Layer 2 service channels between the OLT and the GPON ONT. Prerequisite You need to enter the OLT CLI to perform the following operations that are based on the OLT CLI. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-171 Copyright © Huawei Technologies Co., Ltd.

• Page 210: Table 3-6 Data Plan

  Profile type: Type3 bound to l Assured bandwidth: 15 TCONTs. Mbit/s Different l Maximum bandwidth: 30 TCONTs are Mbit/s planned for l T-CONT ID: 2 3-172 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 211 FTTC, limit the rate on the ONT. Flow Chart Table 3-11 shows the flow chart for enabling Layer 2 service channels between the OLT and the GPON ONT: Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-173 Copyright © Huawei Technologies Co., Ltd.

• Page 212: Figure 3-7 Flow Chart

  200 huawei(config-if-vlanif200)#arp proxy enable huawei(config-if-vlanif200)#quit Step 3 Configure GPON ONT profiles. GPON ONT profiles include the DBA profile, line profile, service profile, and alarm profile. 3-174 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 213 U2560 management channel: Set the DBA profile ID to 40, type to Type2, assured bandwidth to 15 Mbit/s. huawei(config)#dba-profile add profile-id 10 type4 max 102400 huawei(config)#dba-profile add profile-id 20 type3 assure 30720 max 102400 huawei(config)#dba-profile add profile-id 30 type4 max 204800 huawei(config)#dba-profile add profile-id 40 type2 assure 30720 Configure an ONT line profile.
• Page 214 Configure an ONT service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The ID of the VLAN to which ETH port 1 belongs is 10.
• Page 215 If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont- lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont- lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 Automatically find an ONT.
• Page 216 ONT functions as a bridge device. When the ONT functions as a gateway device, the configuration of the port VLAN is implemented on the ONT Web page, NMS, or U2560 server. 3-178 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 217 7, and packets are scheduled according to the priority carried. huawei(config-if-gpon-0/1)#quit huawei(config)#traffic table ip index 8 cir 4096 priority 1 priority-policy tag-In- Package huawei(config)#traffic table ip index 9 cir off priority 6 priority-policy tag-In- Package..
• Page 218 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;..

• Page 219: Table 3-8 Data Plan

  VLAN ID: 20 ID configured on the OLT. l IP address obtaining mode: DHCP l PPPoE must use the same user name and l 802.1p: 6 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-181 Copyright © Huawei Technologies Co., Ltd.
• Page 220 88001234 – Authentication user name: 88001234@softx3000.h uawei.com – Password: iadtest1 l User 2: – Phone number: 88001235 – Authentication user name: 88001235@softx3000.h uawei.com – Password: iadtest2 3-182 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 221: Locally Logging In To The Web Interface

  Common user: – User name: root – Password: admin LAN IP address and subnet mask Default settings: l IP address: 192.168.100.1 l Subnet mask: 255.255.255.0 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-183 Copyright © Huawei Technologies Co., Ltd.

• Page 222: Figure 3-8 Login Interface

  Subnet mask: 255.255.255.0 Procedure Step 1 Use a network cable to connect the LAN port of the HG8240/HG8245/HG8247 to a PC. Step 2 Ensure that the Internet Explorer (IE) of the PC does not use the proxy server. The following section considers IE 6.0 as an example to describe how to check whether the IE uses the proxy..

• Page 223: Configuring The Internet Access Service On The Web Page

  In the navigation tree, choose WAN > WAN Configuration. In the right pane, click New. In the dialog box that is displayed, configure parameters of a WAN port as follows: l WAN Connection: Enable Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-185 Copyright © Huawei Technologies Co., Ltd.
• Page 224 Click Apply to apply the configuration. Step 3 Save the configuration. Choose System Tools > Configuration File from the navigation tree. In the right pane, click Save Configuration. 3-186 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 225: Configuring The Sip-based Voice Service On The Web Page

  You have established the environment for logging in to the Web page for service configuration and have successfully logged in to the Web page. For details, see 3.4.3 Locally Logging in to the Web Interface. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-187 Copyright © Huawei Technologies Co., Ltd.
• Page 226 In the navigation tree, choose Voice > VoIP Interface Configuration. In the right pane, configure parameters of the SIP-based voice interface as follows (other parameters use the default settings): 3-188 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 227 Click Apply to apply the configuration. In the right pane, click New to add voice user 2, and configure parameters of voice user 2 as follows: Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-189 Copyright © Huawei Technologies Co., Ltd.
• Page 228 Choose System Tools > Configuration File from the navigation tree. In the right pane, click Save Configuration. Step 5 Restart the voice process. In the navigation tree, choose Status > VoIP Information. In the right pane, click Restart VoIP. 3-190 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 229: Configuring The H.248-based Voice Service On The Web Page

  3.4.6 Configuring the H.248-based Voice Service on the Web Page This topic provides an example of how to configure the H.248-based voice service on the Web page. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-191 Copyright © Huawei Technologies Co., Ltd.
• Page 230 VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side VLAN ID configured on the OLT.) l 802.1p: 6 l IP Acquisition Mode: DHCP 3-192 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 231 Profile Index can be set to Default, BT, FT, KPN, PCCW, ZTE, or BELL. Choose the value based on the MGC type. Profile Index is set to Default (indicating interconnection with Huawei MGC) in this example. If the settings do not meet requirements, configure UserDefine. For details about how to configure this parameter, contact Huawei technical support.
• Page 232 The terminal IDs A0 and A1 must be consistent with the corresponding configuration on the MGC. l If Associated POTS is 1, port TEL1 on the ONT is bound. If Associated POTS is 2, port TEL2 on the ONT is bound. 3-194 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 233 Step 6 Check the ONT connection status. In the navigation tree, choose Status > WAN Information. In the right pane, Status is Connected and the obtained IP address is displayed at IP. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-195 Copyright © Huawei Technologies Co., Ltd.

• Page 234: Configuring The Wi-fi Access Service On The Web Page

  Web page. For details, see 3.4.3 Locally Logging in to the Web Interface. A portable computer with the Wi-Fi function must be available. 3-196 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 235 (2) In the right pane, click New. In the dialog box that is displayed, configure parameters of the WAN port as follows: – WAN Connection: Enable – Mode: Bridge Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-197 Copyright © Huawei Technologies Co., Ltd.
• Page 236 Save Configuration. Check the ONT connection status. In the navigation tree, choose Status > WAN Information. In the right pane, User Status is Connected. 3-198 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 237 – NAT: Enable – User Name: iadtest@pppoe, Password: iadtest (The user name and password must be the same as the user name and password configured on the BRAS.) Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-199 Copyright © Huawei Technologies Co., Ltd.
• Page 238 In the navigation tree, choose Status > WAN Information. In the right pane, Status is Connected and the obtained IP address is displayed at IP. ----End 3-200 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 239: Configuring The Service By Using U2560

  To configure and issue ONT services using the U2560, you need to add the ONT on the U2560 so that the U2560 can manage the ONT. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-201 Copyright © Huawei Technologies Co., Ltd.

• Page 240: Commissioning Interoperation Between The U2560 And The Ont Through The Web Page

  It is the default value of the system. notification interval ACS user name It is the default value of the system. ACS password It is the default value of the system. 3-202 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 241: Figure 3-9 Flowchart For Commissioning Interoperation Between The U2560 And The Ont Through The Web Page

  In the pane on the right, click New. In the dialog box that is displayed, configure the parameters of the WAN interface as follows: l WAN Connection: Enable l Service List: TR069 l Mode: Route l VLAN ID: 50 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-203 Copyright © Huawei Technologies Co., Ltd.
• Page 242 Click Apply to apply the configuration. Step 3 Save the configuration. Choose System Tools > Configuration File from the navigation tree. In the right pane, click Save Configuration. 3-204 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 243: Data Plan

  FTTH GPON access mode. Subsequent examples are configured based on the following data plan. Table 3-15 shows the unified data plan for the HSI service, VoIP service and Wi-Fi service in an FTTH network. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-205 Copyright © Huawei Technologies Co., Ltd.

• Page 244: Table 3-15 Data Plan For Connecting Onts In The Ftth Gpon Access Mode

  The Wi-Fi service does l 802.1p: 1 not support the Layer 2 mode. l NAT function: enable l Bound port: SSID1 3-206 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 245: Configuring The Internet Access Service Through The U2560

  3.5.3 Configuring the Internet Access Service Through the U2560 This topic provides an example of how to configure the Internet access service through the U2560. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-207 Copyright © Huawei Technologies Co., Ltd.
• Page 246 Choose InternetGatewayDevice > LANDevice > 1 > LANEthernetInterfaceConfig > 1 from the navigation tree. In the right pane, set X_HW_L3Enable to 1, indicating that port LAN1 works in the L3 mode. 3-208 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 247 Set X_HW_VLAN to 10, indicating the VLAN ID of the WAN interface is 10. l Set X_HW_PRI to 1, indicating the priority level of the WAN interface is 1. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-209 Copyright © Huawei Technologies Co., Ltd.
• Page 248 Step 5 Bind a LAN port. Choose 1X_HW_LANBIND from the navigation tree. In the right pane, set Lan1Enable to 1 to bind the WAN interface to LAN port 1. 3-210 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 249: Configuring Sip-based Voice Service Through The U2560

  GPON ONT (on the OLT CLI). The ONT is auto discovered on the U2560. For details, see 3.5.1.1 Commissioning Interoperation Between the U2560 and the ONT Through the Web Page. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-211 Copyright © Huawei Technologies Co., Ltd.
• Page 250 WAN interface. l If the WAN interface obtains IP addresses in PPPoE mode, choose WANPPPConnection to set parameters of the voice WAN interface. 3-212 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 251 Set SignalingProtocol to SIP, indicating that the SIP protocol is used. l Set Region to CN, indicating the country code of China. l Set X_HW_PortName to wan2, indicating that the new WAN interface 2 is bound. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-213 Copyright © Huawei Technologies Co., Ltd.
• Page 252 Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 > SIP from the navigation tree. In the right pane, set the parameters as follows: l Set ProxyServer to softx3000.huawei.com, indicating that the address of the SIP proxy server is softx3000.huawei.com.
• Page 253 Line > 1 from the navigation tree. In the right pane, set DirectoryNumber to 88001234, indicating that the telephone number of SIP user 1 is 88001234. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-215 Copyright © Huawei Technologies Co., Ltd.
• Page 254 3 Configuration Service Manual Choose 1 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001234@softx3000.huawei.com and AuthPassword to iadtest1, indicating that the user name and password of user 1 for authentication are 88001234@softx3000.huawei.com and iadtest1 respectively.
• Page 255 SIP user 2 is 88001235. Choose 2 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001235@softx3000.huawei.com and AuthPassword to iadtest2, indicating that the user name and password of user 2 for authentication are 88001235@softx3000.huawei.com and iadtest2 respectively.

• Page 256: Configuring The H.248-based Voice Service Through The U2560

  Interoperation Between the U2560 and the ONT Through the Web Page. Two telephone sets must be available and each must be connected to ports TEL1 and TEL2 respectively on the ONT. 3-218 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 257 WAN interface. l If the WAN interface obtains IP addresses in PPPoE mode, choose WANPPPConnection to set parameters of the voice WAN interface. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-219 Copyright © Huawei Technologies Co., Ltd.
• Page 258 Set SignalingProtocol to H248, indicating that the H.248 protocol is used. l Set Region to CN, indicating the country code of China. l Set X_HW_PortName to wan2, indicating that the new WAN interface 2 is bound. 3-220 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 259 Domain is ONT's domain name registered on the MGC. It is globally unique. Domain in this example is ONT's SN. l Set MIDFormat to DomainName, indicating that the MG uses its domain name to register. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-221 Copyright © Huawei Technologies Co., Ltd.
• Page 260 Line > 1 > X_HW_H248 from the navigation tree. In the right pane, set LineName to A0, indicating that the TID of H.248 voice user 1 is A0. The user telephone number set on the MGC is 88001234. 3-222 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 261 X_HW_H248 from the navigation tree. In the right pane, set LineName to A1, indicating that the TID of H.248 voice user 2 is A1. The user telephone number set on the MGC is 88001235. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-223 Copyright © Huawei Technologies Co., Ltd.
• Page 262 Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 from the navigation tree. In the right pane, set Reset to 1, indicating that the voice process will be restarted. 3-224 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 263: Configuring The Wi-fi Access Service Through The U2560

  GPON ONT (on the OLT CLI). The ONT is auto discovered on the U2560. For details, see 3.5.1.1 Commissioning Interoperation Between the U2560 and the ONT Through the Web Page. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-225 Copyright © Huawei Technologies Co., Ltd.
• Page 264 Set BeaconType to WPA and WPAEncryptionModes to TKIPandAESEncryption, indicating that the encryption mode of the WPA is TKIP&AES. l Set WPAAthenticationMode to PSKAuthentication, indicating that the authentication mode is Pre-Shared Key. 3-226 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 265 3 Configuration Choose PreSharedKey > 1, 1 from the navigation tree. In the right pane, set PreSharedKey to chinahuawei, indicating that the WPA encryption key is chinahuawei. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-227 Copyright © Huawei Technologies Co., Ltd.
• Page 266 – Set X_HW_VLAN to 40, indicating that the VLAN ID of the WAN interface is – Set X_HW_PRI to 1, indicating that the priority level of the WAN interface is 1. 3-228 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 267 – Set X_HW_VLAN to 40, indicating that the VLAN ID of the WAN interface is – Set X_HW_PRI to 1, indicating that the priority level of the WAN interface is 1. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-229 Copyright © Huawei Technologies Co., Ltd.
• Page 268 WANIPConnection > 1 > X_HW_LANBIND from the navigation tree. In the right pane, set SSID1Enable to 1, indicating that the WAN interface is bound to SSID 1. 3-230 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 269: Operation Guide On The Xml Configuration File

  OMCI protocol and cannot be configured on the Web page or the U2000. Issuing the XML configuration file functions as a supplement to completing all ONT configurations. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-231 Copyright © Huawei Technologies Co., Ltd.

• Page 270: Operation Guide On The Xml Configuration File (on The Web Page)

  Configuration rolls back or even factory defaults are restored if an incorrect XML configuration file is imported. When configuration parameters of an XML configuration file need to be modified, please contact Huawei technical engineers for help. 3.6.1 Operation Guide on the XML Configuration File (on the Web Page) This topic describes how to issue the XML configuration file on the Web page.

• Page 271: Figure 3-10 Exporting The Xml Configuration File

  Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. Save the modified XML configuration file.

• Page 272: Operation Guide On The Xml Configuration File (on The U2000)

  (1) In the Physical Map navigation tree on the Main Topology tab page, double- click the target OLT, or select the target OLT, right-click, and choose NE Explorer. (2) In the navigation tree, choose GPON > GPON ONU. 3-234 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 273: Figure 3-12 Exporting The Xml Configuration File

  Modify the XML configuration file. (1) Open the XML configuration file downloaded in step 1 and find the parameters to be modified. (2) Modify the required parameters. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-235 Copyright © Huawei Technologies Co., Ltd.
• Page 274 Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. (3) Save the modified XML configuration file.

• Page 275: Figure 3-13 Importing The Xml Configuration File

  (3) In the dialog box that is displayed, set relevant parameters. – Profile Name: ONT-XML – Vendor ID: HWTC(2011) – Terminal Type: 245 – Version: V1R002C00-V1R002C01zz Issue 04 (2011-01-12) Huawei Proprietary and Confidential 3-237 Copyright © Huawei Technologies Co., Ltd.

• Page 276: Figure 3-14 Exporting The Xml Configuration Files

  Modify the XML configuration file. (1) Open the XML configuration file downloaded in step 1 and find the parameters to be modified. (2) Modify the required parameters. 3-238 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 277: Figure 3-15 Importing The Xml Configuration Files

  Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. (3) Save the modified XML configuration file.
• Page 278 (4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK. ----End 3-240 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 279: Maintenance And Troubleshooting

  This topic describes how to maintain and troubleshoot the ONT on the NMS. 4.6 Maintenance and Troubleshooting on the OLT CLI This topic describes how to maintain and troubleshoot the ONT on the OLT CLI. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 280: Frequently Used Methods For Troubleshooting

  4.2 General Troubleshooting Flowchart and Methods This topic describes the general troubleshooting flowchart and the methods of preliminarily locating faults. Context Figure 4-1 shows the general troubleshooting flowchart. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 281: Figure 4-1 General Troubleshooting Flowchart

  Step 1 Locate a fault preliminarily. Find the fault location and determine the cause of the fault. Table 4-2 lists the possible causes during preliminary fault locating. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 282: Table 4-2 Locate A Fault Preliminarily

  The codec and authentication configured on the ONT are incorrect. l A phone number conflict occurs during the registration. l The voice IP address fails to be obtained. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 283 If Control Flag is deactive, the ONT registration is disabled. In this case, run the ONT activate command in the GPON mode to activate the control flag. l If Config State is normal, it indicates that the ONT configuration recovery is successful. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 284: Tools Used For Troubleshooting

  Basically, the digital multimeter is used to measure the resistance, DC voltage, AC voltage, current and capacitance, and test diodes and triodes. To use the digital multimeter, do as follows: Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 285: Optical Power Meter

  1310 nm, 1490 nm, and 1550 nm in the GPON network. Figure 4-2 shows the appearance of the PPM-350B optical power meter. Figure 4-2 Appearance of the PPM-350B optical power meter Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 286: Figure 4-3 Measurement Points Of The Optical Power In The Gpon Network

  Connect optical fibers to optical ports correctly in upstream and downstream directions. Turn on the power supply. Choose the measurement unit (dB or dBm). Perform the measurement. Figure 4-4 shows the measurement interface of the optical power meter. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 287: Figure 4-4 Measurement Interface Of The Optical Power Meter

  1490 nm (1 km) 0.25 Optical channel loss = L x a + n1 x b + n2 x c + n3 x d + e + f (dB) Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 288: Remote Maintenance And Troubleshooting On The Web Page

  Step 2 In the navigation tree, choose GPON > GPON ONU. Step 3 On the GPON ONU tab page, set the search criteria to find the GPON ONU records. 4-10 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 289: Figure 4-5 Configuring Static Wan Parameters

  Set Addressing Type to Static and set IP Address, Subnet Mask, and Default Gateway. l Set Service Type to INTERNET. For details, see Figure 4-5. Figure 4-5 Configuring static WAN parameters Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-11 Copyright © Huawei Technologies Co., Ltd.

• Page 290: Maintenance And Troubleshooting On The Nms

  The configuration page is displayed. 4.5 Maintenance and Troubleshooting on the NMS This topic describes how to maintain and troubleshoot the ONT on the NMS. 4-12 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 291: Pppoe Dialup Emulation

  NMS server. After analyzing the test result on the NMS server, you can determine where a fault occurs, which is very useful for daily maintenance and troubleshooting. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-13 Copyright © Huawei Technologies Co., Ltd.

• Page 292: Querying The Physical State Of A Pots Port

  This topic describes how to verify whether a POTS port is in the normal state by querying the physical state of the POTS port on the NMS. 4-14 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 293: Figure 4-8 Querying The Physical State Of A Pots Port

  Figure 4-8 Querying the physical state of a POTS port For the icon meanings, right-click an icon, and choose Lengend from the shortcut menu, as shown in the following figure. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-15 Copyright © Huawei Technologies Co., Ltd.

• Page 294: Querying The Status Of A Voip User

  Step 3 On the GPON ONU tab page, set the search criteria to find the GPON ONU records. Step 4 Select a required record from the ONT list, and then click the POTS User tab in the lower pane. 4-16 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 295: Querying And Deleting Voip Statistics

  Select a record from the list, right-click, and then choose Performance Statistic. In the dialog box that is displayed, view the VoIP statistics, as shown in the following figure. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-17 Copyright © Huawei Technologies Co., Ltd.

• Page 296: Caller Emulation Test

  Prerequisite The OLT and the NMS communicate with each other properly. The NMS is able to discover an online ONT and VoIP service parameters are configured. 4-18 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 297 Step 5 Select a record from the list whose UNI Type is Pots, right-click, and choose Caller Emulation Test from the shortcut menu. Step 6 In the dialog box that is displayed, set Callee Number, as shown in the following figure. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-19 Copyright © Huawei Technologies Co., Ltd.

• Page 298: Callee Emulation Test

  The NMS is able to discover an online ONT and VoIP service parameters are configured. The user connected to the POTS port that is enabled with callee emulation successfully registers with the softswitch. 4-20 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 299 Step 5 Select a record from the list whose UNI Type is Pots, right-click, and choose Callee Emulation Test from the shortcut menu. Step 6 In the dialog box that is displayed, click Start, as shown in the following figure. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-21 Copyright © Huawei Technologies Co., Ltd.

• Page 300: Automatic Emulation Test

  Context The call emulation test verifies the basic calling services during service provisioning, and works with the POTS line test to preliminarily locate a fault. 4-22 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 301 Emulation Test from the shortcut menu. In the dialog box that is displayed, set Callee Number to the number of the callee, as shown in the following figure. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-23 Copyright © Huawei Technologies Co., Ltd.

• Page 302: Local Loopback And Remote Loopback On A Pots Port

  The NMS is able to discover an online ONT and VoIP service parameters are configured. Impact on the System After loopback is set on a POTS port, normal communication is interrupted and an echo is heard by the caller. 4-24 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 303: Voip Loop-line Test

  A VoIP loop-line test is used for locating a fault that occurs on wires A and B. It includes the voltage test, resistance test, and current test. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-25 Copyright © Huawei Technologies Co., Ltd.
• Page 304 Test from the shortcut menu. Step 6 In the dialog box that is displayed, set Busy Processing to No Test or Force, as shown in the following figure. 4-26 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 305: Maintenance And Troubleshooting On The Olt Cli

  OMCI messages to the ONT from the OLT. Context Before querying accurate performance statistics, delete the performance statistics of the Ethernet port first. Procedure Query the performance statistics of an ETH port. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-27 Copyright © Huawei Technologies Co., Ltd.
• Page 306 ETH port. ----End Example To query the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port 0/2/0, do as follows: huawei(config-if-gpon-0/2)#display statistics ont-eth 0 1 ont-port 1 ----------------------------------------------------------------------- Received frames 98 100% Received unicast frames..
• Page 307 EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 4 Maintenance and Troubleshooting huawei(config-if-gpon-0/2)#clear statistics ont-eth 0 1 ont-port 1 Issue 04 (2011-01-12) Huawei Proprietary and Confidential 4-29 Copyright © Huawei Technologies Co., Ltd.

• Page 309: Web Page Reference

  Locally Logging in to the Web Interface. The Web page configurations of the HG8240/HG8245/HG8247 and the HG8240 are similar but the HG8240's Web page does not contain the Wi-Fi node. Because different software versions support different voice protocols, the Voice node contains different parameters.
• Page 310 This topic describes how to use the system tools on the Web page, including using the tools to restart the device, restore the default configuration, and conduct the test. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 311: Status

  The SIP configuration page is slightly different from the H.248 configuration page, as shown in Figure 5-2 Figure 5-3. Figure 5-2 VoIP Information - SIP Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 312: Wi-fi Information

  In the pane on the right, click Enable or Disable to enable or disable the Wi-Fi function. Click the link in blue to go to the corresponding configuration page. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 313: Eth Port Information

  In the navigation tree on the left, choose Status > Optic Information. In the pane on the right, you can view the optical status, transmit optical power, receive optical power of the optical module, as shown in Figure 5-7. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 314: Battery Information

  In the navigation tree on the left, choose Status > Device Information. In the pane on the right, you can view the product name, hardware version, and software version, as shown in Figure 5-9. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 315: Wan

  In the navigation tree on the left, choose WAN > WAN Configuration. In the pane on the right, click New. In the dialog box that is displayed, set Mode to Route, as shown in Figure 5-10. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 316: Figure 5-10 Wan Configuration - Route

  Indicates the VLAN ID. It ranges from 1 to 4094. The VLAN ID must be the same as the CVLAN ID on the OLT. 802.1p Indicates the 802.1p value. It ranges from 0 to 7. Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.
• Page 317 In the navigation tree on the left, choose WAN > WAN Configuration. In the pane on the right, click New. In the dialog box that is displayed, set Mode to Bridge, as shown in Figure 5-11. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 318: Figure 5-11 Wan Configuration - Bridge

  The multicast VLAN ID must be the same as the multicast VLAN ID on the OLT. Bridge Type It can be set to IP or PPPoE. 5-10 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 319: Lan

  In the navigation tree on the left, choose LAN > LAN Port Work Mode. In the pane on the right, determine whether the LAN port works in layer 3 mode, as shown in Figure 5-12. Figure 5-12 LAN Port Work Mode Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-11 Copyright © Huawei Technologies Co., Ltd.

• Page 320: Lan Host Configuration

  After the configuration, the PC connected to the LAN port can automatically obtain an IP address from the address pool, as shown in Figure 5-14. 5-12 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 321: Figure 5-14 Dhcp Server Configuration

  Description Enable primary DHCP server Indicates whether to enable the primary DHCP server. If the check box is selected, you can set the primary DHCP server. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-13 Copyright © Huawei Technologies Co., Ltd.
• Page 322 Indicates the subnet mask of the secondary DHCP server. Start IP Address Indicates the start IP address in the IP address pool on the secondary DHCP server. 5-14 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 323: Wi-fi

  Enable Wireless option box. In the dialog box that is displayed, set the basic Wi-Fi parameters, including the SSID, authentication mode, and encryption mode, as shown in Figure 5-15. Figure 5-15 WI-FI Basic Configuration Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-15 Copyright © Huawei Technologies Co., Ltd.

• Page 324: Table 5-4 Basic Wi-fi Parameters

  Pre-Shared Key, WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, or Wi-Fi Protected Setup. It is set to open by default, that is, the STA can access the network without authentication. 5-16 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 325: Wi-fi Advanced Configuration

  In the navigation tree on the left, choose WI-FI > Wi-Fi Advanced Configuration. In the pane on the right, set the advanced Wi-Fi parameters, including the transmit power, regulatory domain, and channel, as shown in Figure 5-16. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-17 Copyright © Huawei Technologies Co., Ltd.

• Page 326: Figure 5-16 Wi-fi Advanced Configuration

  Indicates the delivery period of the beacon. The beacon is used to contact other access point devices or network control devices. It ranges from 20 ms to 1000 ms, and the default value is 100 5-18 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 327: Security

  New. Then, in the dialog box that is displayed, configure the rule for filtering IP addresses from the WAN interface to the LAN port, as shown in Figure 5-17. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-19 Copyright © Huawei Technologies Co., Ltd.

• Page 328: Figure 5-17 Ip Filter Configuration

  Indicates the type of the protocol, which may be TCP/UDP, TCP, UDP, ICMP, or ALL. LAN-side IP Address Indicates the IP address on the LAN side. 5-20 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 329: Mac Filter Configuration

  MAC address. Therefore, configuring MAC filter rules effectively controls the Internet service access rights of PCs in a LAN. Table 5-7 describes the parameters related to the MAC filter. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-21 Copyright © Huawei Technologies Co., Ltd.

• Page 330: Dos Configuration

  Internet service. As a result, the network service fails. Table 5-8 describes the parameters related to the DoS. 5-22 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 331: Ont Access Control Configuration

  In the navigation tree on the left, choose Security > ONT Access Control Configuration. In the pane on the right, configure the rule of ONT access control, as shown Figure 5-20. Figure 5-20 ONT Access Control Configuration Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-23 Copyright © Huawei Technologies Co., Ltd.

• Page 332: Route

  In the navigation tree on the left, choose Route > Static Route Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to the static route, as shown in Figure 5-22. 5-24 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 333: Forward Rules

  In the navigation tree on the left, choose Forward Rules > DMZ Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to the DMZ, as shown in Figure 5-23. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-25 Copyright © Huawei Technologies Co., Ltd.

• Page 334: Portmapping Configuration

  Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to port mapping, as shown in Figure 5-24. 5-26 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 335: Figure 5-24 Portmapping Configuration

  Indicates the IP address of the host to which the port is mapped. External Source IP Indicates the source IP address of the external data packet. Address Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-27 Copyright © Huawei Technologies Co., Ltd.

• Page 336: Porttrigger Configuration

  Indicates the protocol type of the port trigger packet, which may be TCP, UDP, or TCP/UDP. Open Protocol Indicates the protocol type of the open data packet. 5-28 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 337: Network Applications

  Figure 5-26 USB Click Download to download files from the FTP server to the USB storage device. Table 5-13 describes the parameters related to the USB. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-29 Copyright © Huawei Technologies Co., Ltd.

• Page 338: Alg Configuration

  In the navigation tree on the left, choose Network Applications > UPnP Configuration. In the pane on the right, determine whether to enable the UPnP, as shown in Figure 5-28. 5-30 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 339: Arp Configuration

  ARP entry prevents a device from learning an incorrect ARP entry in the case of malicious attacks. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-31 Copyright © Huawei Technologies Co., Ltd.

• Page 340: Voice

  Figure 5-30 VoIP Interface Configuration - SIP protocol Click Apply to apply the configuration. Table 5-14 describes the parameters used for configuring a VoIP interface based on the SIP protocol. 5-32 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 341: Table 5-14 Parameters Used For Configuring A Voip Interface Based On The Sip Protocol

  1s to 65534s, and the default value is 600s. Signaling Port Indicates the signaling WAN port used for connecting the VoIP terminal to the SIP server. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-33 Copyright © Huawei Technologies Co., Ltd.
• Page 342 VoIP interface can be configured, including the primary MGC server, secondary MGC server, and digitmap, as shown in Figure 5-31. 5-34 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 343: Figure 5-31 Voip Interface Configuration - H.248 Protocol

  Indicates the ID (provided by the ISP) of the port used for communication between the secondary MGC server and the VoIP terminal. The ID ranges from 1 to 65535 and the default ID is 2944. General Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-35 Copyright © Huawei Technologies Co., Ltd.
• Page 344 RTP TID Prefix Indicates the prefix of the ephemeral termination. The default prefix on Huawei softswitches is A100. Start Number of RTP Indicates the start number of the suffix of the ephemeral termination. The default value is 0.

• Page 345: Voip User Configuration

  VoIP user, including the register user name, authentication user name, password, and associated POTS, as shown in Figure 5-32. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-37 Copyright © Huawei Technologies Co., Ltd.

• Page 346: Figure 5-32 Voip User Configuration - Sip Protocol

  POTS, as shown in Figure 5-33. Figure 5-33 VoIP User Configuration - H.248 Protocol 5-38 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 347: System Tools

  In the navigation tree on the left, choose System Tools > Reboot. In the pane on the right, click Reboot to restart the device, as shown in Figure 5-34. Figure 5-34 Reboot Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-39 Copyright © Huawei Technologies Co., Ltd.

• Page 348: Restore Default Configuration

  If the ping test is successful, The result is displayed as PASS, that is, the ONT can interwork with the device with the destination IP address. 5-40 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 349: Log

  Click Browse following the Configuration File text box. In the dialog box that is displayed, select the configuration file to be uploaded. Click Upload Configuration File to upload Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-41 Copyright © Huawei Technologies Co., Ltd.

• Page 350: Firmware Upgrade

  ONT on the OLT, as shown in Figure 5-40. Figure 5-40 ONT Authentication 5-42 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 351: Time Setting

  Indicates whether to enable the auto synchronization network time Network Time Server server, that is, SNTP server. Primary SNTP Server Indicates the primary SNTP server. Secondary SNTP Server Indicates the secondary SNTP server. Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-43 Copyright © Huawei Technologies Co., Ltd.

• Page 352: Tr-069

  In addition, Service List of the WAN interface must contain the TR069. For details, see 5.2.1 WAN Configuration. Click Apply to apply the configuration. Table 5-19 describes the TR-069 parameters. 5-44 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 353: Modify Login Password

  In the navigation tree on the left, choose System Tools > Modify Login Password. In the pane on the right, set the password for ONT login, as shown in Figure 5-43. Figure 5-43 Modify Login Password Issue 04 (2011-01-12) Huawei Proprietary and Confidential 5-45 Copyright © Huawei Technologies Co., Ltd.

• Page 354: Advanced Power Management

  Management. In the pane on the right, you can start the ONT energy conservation mode and set the power saving mode, as shown in Figure 5-44. Figure 5-44 Advanced Power Management Click Apply to apply the configuration. 5-46 Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.

• Page 355: Technical Specifications

  This topic describes the physical specifications of the ONT, including its dimensions, weight, voltage range, and environment parameters. 6.2 Protocols and Standards This topic provides the protocols and standards which the ports of the ONT comply with. Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

• Page 356: Physical Specifications

  Service Manual 6.1 Physical Specifications This topic describes the physical specifications of the ONT, including its dimensions, weight, voltage range, and environment parameters. Table 6-1 lists the physical specifications of the HG8240/HG8245/HG8247. Table 6-1 Physical specifications Item HG8240 HG8245 HG8247..

• Page 357: Acronyms And Abbreviations

  Network Address Translation Network Management System Optical Line Terminal OMCI Optical Network Termination Management and Control Interface Passive Optical Network PPPoE Point to Point Protocol over Ethernet Issue 04 (2011-01-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
• Page 358 Universal Plug and Play Uniform Resource Locator VLAN Virtual Local Area Network VoIP Voice over IP WLAN Wireless Local Area Network Wired Equivalent Privacy Wi-Fi Protected Access Wi-Fi Protected Setup Huawei Proprietary and Confidential Issue 04 (2011-01-12) Copyright © Huawei Technologies Co., Ltd.